Home  |  Products  |  About Us  |  What's New  |  Contact Us  |  Press   |  E-mail

VCL-STM-4 (upto 252 E1)

Technical Specifications

  • Multiple Services from E1, E3, STM-1, STM-4

  • STM-1/4 VCL100 STM-1/4 (upto 252 E1)

  • E1/DS1s

  • E3/DS3s

  • E4/STM-1 electrical

  • STM-1 optical

  • E1, E3 and Ethernet over SDH

  • GigE

  • Cost effective



 

Introduction STM-1/4 SDH Multiplexer

Orion Telecom Networks Inc. offers the VCL100 STM-1/4 is a modular, and cost effective STM-1/4 SDH multiplexer equipment designed to manage bandwidth and voice & data access services over STM networks. The products are designed to support end-to-end provisioning and management of services across all segments of the optical network. It combines innovative optical networking software with the intelligence of SONET/SDH to deliver a flexible, cost-effective network solution.

The VCL100 STM-1/4 provides flexibility to the customers in terms of expansion to support additional client interfaces by adding new modules in the field. It is also a scalable system that enables the customer to start with an STM-1 network and upgrade to STM-4 as the traffic demand increases.

The distinguishing features of VCL100 STM-1/4 over competing products are its unprecedented port density, scalability, redundancy and upgrade-ability with its software intelligence. The VCL100 STM-1/4 family of products can be managed through an integrated NMS that manages all STM equipment, providing customers with end-to-end provisioning from a single platform for multiple service types – from E1s, E3s, STM-1, STM-4, and 10/100Mbps Ethernet services.

The STM-1 / STM-4 can be managed through an integrated NMS that manages all the equipment, providing customers with end-to-end provisioning from a single platform for multiple service types - from E1/DS1s, E3/DS3s, E4/STM-1e, STM-1o and 10/100Mbps Ethernet services.

VCL100 STM-1/4 - Technical Specifications

Network Topology
  • Linear
  • Ring
  • Mesh
Network Element
Configurations
  • Single/Dual Terminal Multiplexer (Dual TMUX)
  • Add Drop Multiplexer (ADM)
  • Regenerator
  • In-Line Amplifier
  • Cross Connect
Line Side (Aggregate) Optics
  • 2 X STM-1/4 1310 or 1550 nm (ITU-T G.957 Compliant)
  • S/L 1.1, S/L 1.2, S/L 4.1, S/L/V/U 4.2
  • L 1.2JE, L 4.2JE (Joint Engineering)
Tributary Interfaces
  • E1/E3/E4 Electrical
  • STM-1o/STM-1e
  • 10/100 Ethernet
Modularity
  • Modular in design, capable of upgradation to STM-4
  • Separate aggregate and tributary cards
  • Mix and match tributaries – E1, E3, DS3, E4,
    STM-1o/e, 10/100 Ethernet
Cross Connect
  • VC-12
  • Fully non blocking
  • Line to Line, Line to Tributary, Tributary to Line,
    Tributary to Tributary
Protection
  • SNCP 1+1 MSP (as per G.841)
  • VC-12, VC-3, VC-4 level path protection
Optional Hardware Redundancy
  • Power Supply Card
  • Processor Card
  • Cross-connect Card
  • Aggregate Card
Maintenance
 
  • Higher-order and Lower-order POH, SDH level alarms
    and performance monitoring (as per G.826 and G.784)
  • Local & remote loop back
  • Software Downloads
Management
  • Element Management System: NES ( Network
    Element Software), supports full FCAPS functionality.
  • RS-232 port for craft interface
  • V.24/V.28 Modem interface for remote management
  • In-band control supported using SDH Overhead
  • 10/100Base-T/RJ45 management interface
  • Alarm Signaling Indicators and External Contacts
Power Supply
 
  • Power Input: -48V DC nominal, -36V to 60V DC
  • Power consumption: less than 100W
Timing & Synchronization
  • Timing & Synchronization of System (as per G. 813)
  • Internal and External Timing interfaces: Two E1 BITS
    interfaces (G.703)
  • Internal oscillator capable of supplying a G.813
    compliant Stratum-3 SEC
  • Support of SSM byte
Order wire support and user data channel
  • E1 / E2 bytes used for Express order wire (Omnibus/
    Selective calling facilities)
  • F1 byte for user data channel
Physical Dimensions
  • Dimensions (H X W X D): 267 mm x 462 mm x 280
    mm (10.5 in x 18.2 in x 11 in); Can be mounted on a
    19” or 23” or 600mm rack
  • Weight: 2.5 Kg (6 Kg fully loaded)
Environmental
  • Operating Temperature 0° to 50° C
  • Relative Humidity 10% to 90%, non-condensing

Related Products:

Others Links:

Technical specifications are subject to change without notice.
All brand names and trademarks are the property of their respective owners.

 

VCL-STM-4 (upto 252 E1) - Product Brochure (PDF)
MTBF and Budgets (PDF)
Product Overview
System Hardware
Network Element Software
Applications

GSM Gateway / GSM Channel Banks

Echo Cancellers and Voice Quality Enhancement

Digital Access Cross Connect Switch (DACS)

Groomers (Hi-Z Non-Instrusive Monitoring)

STM SDH Multiplexer
Multiplexers
Optical Transmission
E1, T1, E3, DS3, Ethernet Converters
APS (1+1) Automatic
Protection Switch
::   Application Diagram  ::
 
Home    |   What's New   |   About Us   |   Contact Us   |   Products   |    Press   |   E-mail