The Quintum Tenor DX Multipath Switch
offers enterprises an easy, cost-effective way to capitalize on the power of
Voice over IP (VoIP). The Tenor integrates a gateway, a gatekeeper,
intelligent call routing and supports H.323, SIP and QoS all in one
solution.Enterprises can benefit from a variety of valuable applications
such as PBX extension, remote office connectivity, long distance
consolidation and call centers. Product scales from a fractional
T1/E1, with 8 simultaneous VoIP channels up to a full 8 span
Multipath switch supporting 120 simultaneous VoIP calls.
Patented SelectNet™ Technology assures
high quality voice.
The Tenor employs its patented SelectNet™ Technology to
monitor calls for jitter, packet loss, and latency and can
transparently switch mid-call to the voice network whenever
conditions demand.
More intelligence means greater
flexibility.
With its Multipath Call Routing, the Tenor can intelligently
route calls between the PBX, the PSTN, and the IP network to achieve
the best combination of cost and quality. The Tenor can also route
calls over IP to reduce costs and then transparently "hop off" to
the PSTN, to reach off-net locations. No other VoIP solution can
match this flexibility.
More intelligence means easier
installation.
With its Multipath architecture, the Tenor is the only
VoIP solution that can be installed without upgrades to the existing
voice or data networks. Tenor connects to the data network through a
10/100 Ethernet Interface and to the enterprise and public voice
network through a T1, E1, or PRI interface.
More intelligence means greater
reliability.
The Tenor is designed to pass calls through to the
existing voice network in the event of system malfunction—even a
total power failure.
More intelligence means less network
congestion.
With its PacketSaver™ Technology, the Tenor reduces
bandwidth consumption up to 57%, by combining voice packets from
several calls into a single packet to minimize bandwidth
requirements.
NATAccess™ intelligence means greater
security.
The Tenor VoIP Multipath Switch also features a unique
technology that allows it to operate behind NAT-enabled firewalls.
The innovative NATAccess™solution overcomes the problem of NAT
firewalls not correctly translating internal IP addresses into
public addresses when a VoIP call is established with an outside
party.
Call Management Features
- Automatic call type detection: Voice/Modem/Fax
- Answer and Disconnect Supervision
- Trunk group support
- Public and private dial plan support
- User programmable dial plan support
- Automated load balancing
- Forced routing
- Pass-through support for calls to 800, 911, 411, etc.
- Automatic appending and stripping of digits to dialed numbers
- Call Detail Records
- Call Blocking
- Type I Caller ID delivery
Other Links