Monitoring Patch Panels
Orion Telecom Offers Power Utility Solutions Oil & Gas Networks Solutions Railway & Metro Rail Solutions PTP IEEE-1588v2 GPS Primary Reference Clock Packet Optical Transport Multiplexers Teleprotection SCADA, FOTE, OLTE Digital Cross Connects Echo Cancellers IP/Ethernet over TDM 1+1 APS (Fail-Over) Solutions Monitoring Groomer Solutions
Monitoring Patch Panels and Splitters
Orion Telecom Networks Inc. offers wide range of patch panel including XC 64 E1 Electronic Patch Panel, XC 64 T1 Electronic Patch Panel, 16xE1 75 Ohms with High Impedance (Hi-Z) Monitoring Port, E1 75 Ohms 16 Port High Impedance (Hi-Z) Monitoring patch panel, T1 100 Ohms 16 Port High Impedance (Hi-Z) Monitoring patch panel, E1 120 Ohms 16 Port High Impedance (Hi-Z) Monitoring patch panel.
We. offers wide range of 16 x E1 Splitter (120 Ohms), 16 x T1 Splitter (100 Ohms), Optical Splitters.
Orion offers the following type of Patch Panels:
| Products | Description | |
|---|---|---|
| XC 64 E1 Electronic Patch Panel | XC 64 E1 intelligent electronic patch panel which allows the user to cross-connect any E1 port to any / multiple E1 ports, electronically, without having to use any external patch-cords or loosely hanging wires. | Data Sheet (PDF) |
| XC 64 T1 Electronic Patch Panel | XC 64 T1 intelligent electronic patch panel which allows the user to cross-connect any T1 port to any / multiple T1 ports, electronically, without having to use any external patch-cords or loosely hanging wires. | Data Sheet (PDF) |
| 16 x E1 75 Ohms (Siemens - DIN 1.6/5.6 Connector) Patch Panel with Additional Hi-Z Monitoring Port | 16 x E1 75 Ohms (Siemens - DIN 1.6/5.6 Female Connector) Patch Panel Hi-Z Monitoring Port is primarily designed for applications where E1 circuits are required to be "patched" as well as simultaneously "tapped" for non-intrusive monitoring applications. | Data Sheet (PDF) |
| 16 x E1 75 Ohms (Ericsson - M4 Male Connector) Patch Panel Hi-Z Monitoring Port | 16 x E1 75 Ohms (Ericsson - M4 Male Connector) Patch Panel Hi-Z Monitoring Port is primarily designed for applications where E1 circuits are required to be "patched" as well as simultaneously "tapped" for non-intrusive monitoring applications. | Data Sheet (PDF) |
| 16 x E1 75 Ohms (Ericsson - M4 Female Connector) Patch Panel Hi-Z Monitoring Port | 16 x E1 75 Ohms (Ericsson - M4 Female Connector) Patch Panel Hi-Z Monitoring Port is primarily designed for applications where E1 circuits are required to be "patched" as well as simultaneously "tapped" for non-intrusive monitoring applications. | Data Sheet (PDF) |
| 16 x E1 75 Ohms BNC Female Connector) Patch Panel Hi-Z Monitoring Port | 16 x E1 75 Ohms (BNC Female Connector) Patch Panel Hi-Z Monitoring Port is primarily designed for applications where E1 circuits are required to be "patched" as well as simultaneously "tapped" for non-intrusive monitoring applications. | Data Sheet (PDF) |
| 16 x E1 75 Ohms (BT43 Male Connector) Patch Panel Hi-Z Monitoring Port | 16 x E1 75 Ohms (BT43 Male Connector) Patch Panel Hi-Z Monitoring Port is primarily designed for applications where E1 circuits are required to be "patched" as well as simultaneously "tapped" for non-intrusive monitoring applications. | Data Sheet (PDF) |
| E1 75 Ohms, 16 Port High Impedance (Hi-Z) Monitoring Patch Panel | 75 Ohms Patch-Panel is used for E1 Monitoring Application Connecting 75 Ohms Patch panel to live E1 traffic - Monitoring Application. The BNC Connector is used for Data IN / Data OUT from the 75 Ohm E1 links which are required to be monitored. Data IN of Patch-Panel (BNC) will be connected to Transmit / Data OUT of E1 Port. Data OUT of Patch-Panel (BNC) will be connected to Receive / Data IN of E1 Port. 120 Ohms (RJ45) E1 of the Patch-Panel will connect to VCL-MegaConnect using "Y" cable. | Data Sheet (PDF) |
| E1 120 Ohms, 16 Port High Impedance (Hi-Z) Monitoring Patch Panel | E1, 120 Ohms, 16 Port High Impedance Monitoring Patch Panel is primarily designed for applications where E1 circuits are required to be "patched" as well as simultaneously "tapped" for non-intrusive monitoring applications. It is primarily designed to patch up to 16, E1 circuits. It also, simultaneously, provides up to 16 high-impedance (Hi-Z) outputs on it's monitoring (MON) port(s) from which, both the transmit (Tx) and the receive (Rx) signals of the patched E1 link can be "tapped non-intrusively" (i.e without disturbing or loading the active E1 link(s) in any manner). | Data Sheet (PDF) |
| T1 100 Ohms, 16 Port High Impedance (Hi-Z) Monitoring Patch Panel | T1, 100 Ohms, 16 Port High Impedance Monitoring Patch Panel is primarily designed for applications where T1 circuits are required to be "patched" as well as simultaneously "tapped" for non-intrusive monitoring applications. It is primarily designed to patch up to 16, T1 circuits. It also, simultaneously, provides up to 16 high-impedance (Hi-Z) outputs on it's monitoring (MON) port(s) from which, both the transmit (Tx) and the receive (Rx) signals of the patched T1 link can be "tapped non-intrusively" (i.e without disturbing or loading the active T1 link(s) in any manner). | Data Sheet (PDF) |
| 16 x E1 Splitter (120 Ohms) | The 16 x E1 Splitter (120 Ohms) "Splits" the E1 signal that it receives between two E1 ports, by monitoring the same E1 signal on two ports, simultaneously. It may be used in application that require the E1 signal input to be simultaneously connected to active terminal equipment, while at the same time connecting it to "shadow" equipment such as call loggers, voice call recorders, data recorders or any other such equipment that does not load the active E1 link in any way and connects to the live E1 links non-intrusively. | Data Sheet (PDF) |
| 16 x T1 Splitter (100 Ohms) | The 16 x T1 Splitter (100 Ohms) "Splits" the T1 signal that it receives between two T1 ports, by monitoring the same T1 signal on two ports, simultaneously. It may be used in application that require the T1 signal input to be simultaneously connected to active terminal equipment, while at the same time connecting it to "shadow" equipment such as call loggers, voice call recorders, data recorders or any other such equipment that does not load the active T1 link in any way and connects to the live T1 links non-intrusively. | Data Sheet (PDF) |
| Optical Splitter | Orion offers 1x2 Optical Splitters in 90:10 and 80:20 ratios. The Optical Splitters "split" the input optical signal received by it between two optical outputs, simultaneously, in a pre-specified ratio. | Data Sheet (PDF) |