Product Overview

Product Overview

Orion Telecom Networks Inc. offers 'VCL-T1oP' T1 over Packet (32 T1 Port GE Version) TDM over IP equipment supports transmission of up to 32 x T1 links over IP / Ethernet, MEF or MPLS Pseudo-wire networks.

The 'VCL-T1oP' T1 over Packet (32 T1 Port GE Version) TDM over IP equipment, equipped with a highly reliable clock recovery mechanism for low jitter and wander control, even under variable network conditions.

32 T1 Port T1oP (T1 over Packet) equipment provides 4x Gigabit electrical Ethernet ports along with 4 x Gigabit optical Ethernet ports out of which the user may select and use any 4, to implement 1+1 add-drop (Drop-Insert), Ethernet link redundancy (Rapid Spanning Tree Protocol and Ethernet Port Trunking) and QoS by implementing 802.1Q based VLAN, Differentiated Services (Diffserv / DSCP), Port based Priority and 802.1p packet priority classification protocols for network optimization.

Data Sheet (PDF)

T1oP and DS3oP / T3oP - IP Multiplexer / TDM over IP / Ethernet / Packet - Products Comparison Chart

Techical Specifications

T1oP Specifications

Max number of T1 Ports	Number of Ports 32 Note: Multiple units may be cascaded to support 32/64/128 T1 Port aggregation at the Central Office / MSC (Mobile Switching Center).
Max number of logical links	Up to 128
Synchronization clock recovery	Adaptive Clock Recovery recovery (ACLK) Options Recovered Clock (RCLK) / Loop-Timed Clock Asymmetrical (One-Clock and Two-Clock) Clock Synchronization to an External Clock (ECLK) Internal Clock Automatic fall back
Max number of Ethernet Port	4 x Gigabit Optical Ethernet Ports (SFP) 4 x 10/100/1000Base-T Electrical Ethernet Note: May use any combination of 4 Copper or Fiber Ports
Supported Transport	ETF-PWE3, SAToP and CESoPSN Mechanisms
Supported PSN (Packet Switched Networks) type	UDP, IP, MPLS and MEF
QoS	802.1q, 802.1p packet priority

T1 Interface

Number of Ports	Number of Ports 32 (supporting 64Kbps upto 1.544Mbps on each port)
Framing Formats	SF, ESF, Unframed
Line Coding	AMI, B8ZS
Compliance	ITU-T G.703, G.704, G.706
Jitter and Wander	Complies to ITU-T G.824
Line Impedance	100 Ohms balanced
Protection	Optional Metallic and Longitudinal Protection ESD protection

Ethernet Interface

Number of Ports	4 Gigabit optical ports and 4 GigE (electrical) ports. Complies with IEEE802.3, 802.1Q and 802.1P Note: May use any combination of 4 Copper or Fiber Ports.
Electrical	10/100/1000 Auto-negotiation / MDI-X (Auto-sensing), Full-Half Duplex, RJ45 Electrical Connector
Protection	ESD protection
Optical	1000Base-FX (Gigabit Ethernet), SFP
Protection	ESD protection
Maximum Frame Size	9000 Bytes (Jumbo Frames)
Switching Capacity	Upto 6 Gbps, Non-blocking

Gigabit Optical Ethernet Specifications

Type	SFP
Compliance	Compliant with IEEE 802.3z Fast Ethernet 1000BASE-LX MSA Compliant RoHS EMI ESD DDM
Safety	Class 1 Laser Safety/ IEC-60825 Compliant
Bit Rate	1.25 Gbps
Wavelength	1310 / 1550 nm
Distance	550m to 80Kms, as per order
Optical Connector	LC

Command Language

• Windows based GUI (Graphical User Interface)
• Command Line Interface (English text commands)

Management and Control Interfaces

• COM Port (RS232 Serial Port)
• 10/100/1000BaseT Ethernet Port (each multiplexer may be assigned an IP address and connected to a LAN / IP network for remote access and management through the 10/100BaseT Ethernet Port for in-band configuration, management and access)
• Telnet
• SNMP, V2
• Additionally, a Windows based GUI (Graphical User Interface) for easy configuration, management and access.

Environment

Temperature	-20°C ~ +60°C for Operation
Humidity	5% to 95% (at 35°C) Non-condensing

Regulatory Compliance

• Safety - IEC 60950 Safety - IEC 60950
• CE
• RoHS
• Complies to ANS/IEC standards
• Complies with Telecom Part 68, FCC Part 15 and CISPR 22 Class A
• EMC EN55022: 1998 + A1 and A2
• EMC EN55024,
• Operation ETS 300 019 Class 3.2
• Storage ETS 300 019 Class 1.2
• Transportation ETS 300 019 Class 2.3

NMS (with Telnet) OAM port Specifications

Network Interface	RJ-45 10/100/1000BaseT (Auto sensing)
Compatibility	Ethernet Version 2.0 IEEE 802.3
Protocols supported	ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP
Management	SNMP, Serial login, Telnet login
EMI Compliance	Radiated and conducted emissions complies with Class B limits of EN55022:1998 Direct and Indirect ESD complies with EN55024: 1999 RF Electromagnetic Field Immunity complies with EN55024:1998 Electrical Fast Transient / Burst Immunity complies with EN55024:1998 Power Frequency Magnetic Field Immunity complies with EN55024:1998 RF Common Mode Conducted Susceptibility complies with EN55024:1998

External Alarms

• Dry Contact Relay - 2 Form C
• Rated upto 72V DC, 1 Amp.

Chassis

• 1U High (44mm)
• 19-inch rack-mounting shelf
• Also available in Desktop / Table Top Version.

Mechanical Specification

Height	44 mm (1U)
Depth	260 mm
Width	480 mm (19 inch rack mountable)
Weight	4 Kgs.