8T1 over Ethernet / TDM over IP with IEEE-1588v2 Version - Technical Specifications
Orion Telecom Offers Power Utility Solutions Oil & Gas Networks Solutions Railway & Metro Rail Solutions PTP IEEE-1588v2 GPS Primary Reference Clock Packet Optical Transport Multiplexers Teleprotection SCADA, FOTE, OLTE Digital Cross Connects Echo Cancellers IP/Ethernet over TDM 1+1 APS (Fail-Over) Solutions Monitoring Groomer Solutions
Product Overview
'Orion Telecom Networks Inc. offers 'VCL-T1oP' T1 over Packet (8 T1 Port IEEE-1588v2 Version) TDM over IP equipment supports transmission of up to 8 x T1 links over IP / Ethernet, MEF or MPLS networks and synchronization using IEEE-1588v2 protocol.
The 'VCL-T1oP' T1 over Packet (8 T1 Port IEEE-1588 Version) TDM over IP equipment with IEEE-1588 protocol engine which provides a highly reliable clock recovery mechanism for extremely low jitter and wander control, even under variable network conditions.
8 x T1 Port T1oP (T1 over Packet) TDM over IP equipment provides 4 x GigE electrical ports along with 4 x Gigabit optical ports (out of which the user may select and use any 4 ports) to implement 1+1 add-drop (Drop-Insert), Ethernet link redundancy (Rapid Spanning Tree Protocol and Ethernet Port Trunking) and QoS by implementing 802.1Q based VLAN, Differentiated Services (Diffserv / DSCP), Port based Priority and 802.1p packet priority classification protocols for network optimization.
8 T1 Port IEEE-1588 Version - Product Overview
T1oP and DS3oP / T3oP - IP Multiplexer / TDM over IP / Ethernet / Packet - Products Comparison Chart
Techical Specifications
T1oP Specifications
Max number of T1 Ports | Number of Ports 8 |
Max number of logical links | Up to 64 |
Synchronization clock recovery |
|
Max number of Ethernet |
(may use a combination / mix of any 4 Copper or Fiber Ports) |
Supported Transport | ETF-PWE3, SAToP and CESoPSN Mechanisms |
Supported PSN (Packet Switched Networks) type | UDP, IP, MPLS and MEF |
T1 Interface
Number of Ports | Number of Ports 8 (supporting 64Kbps upto 1.544Mbps on each port) |
Framing Formats | SF, ESF, Unframed |
Line Coding | AMI, B8ZS |
Compliance | ITU-T G.703, G.704, G.706 and G.732 |
Jitter and Wander | Complies to ITU-T G.823, G.824 |
Line Impedance | 100 Ohms balanced |
Protection | Telcordia GR-1089-CORE Lightning and Power Contact and IEC 61000-4-5 Surge Protection |
Uplink Gigabit Ethernet Interfaces
Number of Uplink Ports | 4 Gigabit optical ports and 4 GigE (electrical) ports, complies with IEEE802.3, 802.1Q and 802.1P – the user may select and use any 4 ports |
Electrical | 10/100/1000 Auto-negotiation / MDI-X (Auto-sensing), Full-Half Duplex, RJ45 Electrical Connector |
Optical | 1000Base-FX (Gigabit Ethernet), SFP |
Maximum Frame Size | 9728 Bytes (Jumbo Frames) |
Switching Capacity | Upto 9 Gbps, Non-blocking |
Protection | Telcordia GR-1089-CORE Lightning and Power Contact |
Uplink Gigabit Optical Ethernet Specifications
Type | SFP |
Compliance |
|
Safety | Class 1 Laser Safety/ IEC-60825 Compliant |
Bit Rate | 1.25 Gbps |
Wavelength | 1310 / 1550 nm |
Distance | 550m to 80Kms, as per order |
Optical Connector | LC |
IRIG-B Interface
IRIG-B Interface | 50 Ohms, BNC Connector |
Command Language
- Windows based GUI (Graphical User Interface)
- Command Line Interface (English text commands)
Management and Control Interfaces
- COM Port (RS232 Serial Port)
- 10/100/1000BaseT Ethernet Port (each multiplexer may be assigned an IP address and connected to a LAN / IP network for remote access and management through the 10/100BaseT Ethernet Port for in-band configuration, management and access)
- Telnet
- SNMP, V2
- Additionally, a Windows based GUI (Graphical User Interface) for easy configuration, management and access.
Environment
Temperature | -40°C ~ +60°C for Operation |
Humidity | 5% to 95% (at 35°C) Non-condensing |
Regulatory Compliance
- Safety - IEC 60950
- CE
- RoHS
- Complies to ANS/IEC standards
- Complies with Telecom Part 68, FCC Part 15 and CISPR 22 Class A
- EMC EN55022: 1998 + A1 and A2
- EMC EN55024,
- Operation ETS 300 019 Class 3.2
- Storage ETS 300 019 Class 1.2
- Transportation ETS 300 019 Class 2.3
NMS (with Telnet) OAM port Specifications
Network Interface | RJ-45 10/100/1000BaseT (Auto sensing) |
Compatibility | Ethernet Version 2.0 IEEE 802.3 |
Protocols supported | ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP |
Management | SNMP, Serial login, Telnet login |
External Alarms
- Dry Contact Relay - 2 Form C
- Rated upto 72V DC, 1 Amp.
Chassis
- 2U High
- 3U Hugh
- 19-inch rack-mounting shelf
Mechanical Specification
Height | 88 mm (2U), 142 mm (3U) |
Depth | 260 mm |
Width | 480 mm (19 inch rack mountable) |
Weight | 4 Kgs. |
Power Consumption
Power Consumption | <21 Watts – 2U chassis <30 Watts – 3U chassis |
Power Supply Options
- Dual Redundant (AC + DC)
- 1+1 AC power (100 to 240V AC, 50/60 Hz)
- 1+1 DC (-48V) power (40 to 72V DC)
- 1+1 DC (-24V) power (18 to 40V DC)
- AC or DC
- EMI/EMC compliant.
AC Power Supply Specifications
Input AC Voltage | 110 / 220 Volts AC |
Range of input AC Voltage | 100 V to 240 V AC, 50Hz/60Hz. |
AC Input Connector | IEC Connector |
24V DC Power Supply Specifications
Power Supply | 24V DC |
Range of input | 18V to 40V DC |
Input voltage reversal protection | Provided |
Under voltage protection | < 4.85V |
Over voltage protection | > 5.15V |
Efficiency at full load | > 90% @ 5V/4A (when input voltage-24V) |
Ripple at full load | < 5mVrms |
Spike at full load | < 50mV |
48V DC Power Supply Specifications
Power supply | -48V DC |
Range of input | -40V DC to -60V DC |
Under voltage protection | < 4.85V |
Over voltage protection | > 5.15V |
Efficiency at full load | > 91% @ 5V/2A (when input voltage -48V) |
Ripple at full load | < 5mVrms |
Spike at full load | < 50mV |