VCL-T1oP (8T1 over IP/Ethernet GE Version), T1 over IP / T1 over Packet / T1 over Ethernet
Technical Specifications
Orion Telecom Offers Power Utility Solutions Oil & Gas Networks Solutions Railway & Metro Rail Solutions PTP IEEE-1588v2 GPS Primary Reference Clock Packet Optical Transport Multiplexers Teleprotection SCADA, FOTE, OLTE Digital Cross Connects Echo Cancellers IP/Ethernet over TDM 1+1 APS (Fail-Over) Solutions Monitoring Groomer Solutions
Product Overview
Orion Telecom Networks Inc. offers 'VCL-T1oP' T1 TDM over Packet (8 T1 Port GE Version) TDM over IP equipment supports transmission of up to 8 x T1 links over IP / Ethernet, MEF or MPLS Pseudo-wire networks.
The 'VCL-T1oP' T1 over Packet (8 T1 Port GE Version) TDM over IP equipment, equipped with a highly reliable clock recovery mechanism for low jitter and wander control, even under variable network conditions.
8 T1 Port T1oP equipment provides 2 x GigE electrical ports along with 2 x Gigabit optical ports which allow the Users to implement 1+1 add-drop (Drop-Insert), Ethernet link redundancy (Rapid Spanning Tree Protocol and Ethernet Port Trunking) and QoS by implementing 802.1Q based VLAN, Differentiated Services (Diffserv / DSCP), Port based Priority and 802.1p packet priority classification protocols for network optimization.
The 'VCL-T1oP' T1 over Packet (8 T1 Port GE Version) TDM over IP equipment also optimizes on the network usage, such that the bandwidth used by the T1oP equipment on the packet network is limited to the corresponding to the number of T1 ports and the time-slots that are being transported over the Ethernet / packet network.
T1oP and DS3oP / T3oP - IP Multiplexer / TDM over IP / Ethernet / Packet - Products Comparison Chart
Techical Specifications
E1oP Specifications
Max number of E1 Ports | Number of Ports 2 |
Max number of logical links | Up to 64 |
Synchronization clock recovery |
|
Max number of Ethernet Port |
|
Supported Transport | ETF-PWE3, SAToP and CESoPSN Mechanisms |
Supported PSN (Packet Switched Networks) type | UDP, IP, MPLS and MEF |
QoS | 802.1q, 802.1p packet priority |
E1 Interface
Number of Ports | Number of Ports 2 (supporting 64Kbps upto 2.048Mbps on each port) |
Framing Formats | Unframed, framed and Multi-frame (with or without CRC-4) |
Line Coding | HDB3 |
Compliance | ITU-T G.703, G.704, G.706 and G.732 |
Jitter and Wander | Complies to ITU-T G.823, G.824 |
Line Impedance | 120 Ohms balanced
|
Protection | Optional Metallic and Longitudinal Protection
|
Ethernet Interface
Number of Ports |
|
Electrical | 10/100/1000 Auto-negotiation / MDI-X (Auto-sensing), Full-Half Duplex, RJ45 Electrical Connector |
Protection | ESD protection |
Optical | 100Base-FX (Gigabit Ethernet), SFP |
Protection | ESD protection |
Maximum Frame Size | 9000 Bytes (Jumbo Frames) |
Switching Capacity | Upto 6 Gbps, Non-blocking |
Gigabit Optical Ethernet Specifications
Type | SFP |
Compliance |
|
Safety | Class 1 Laser Safety/ IEC-60825 Compliant |
Bit Rate | 1.25 Gbps |
Wavelength | 1310 / 1550 nm |
Distance | 550m to 80Kms, as per order |
Optical Connector | LC |
Command Language
- Windows based GUI (Graphical User Interface)
- Command Line Interface (English text commands)
Management and Control Interfaces
- COM Port (RS232 Serial Port)
- 10/100/1000BaseT Ethernet Port (each multiplexer may be assigned an IP address and connected to a LAN / IP network for remote access and management through the 10/100BaseT Ethernet Port for in-band configuration, management and access)
- Telnet
- SNMP, V2
- Additionally, a Windows based GUI (Graphical User Interface) for easy configuration, management and access.
Environment
Temperature | -20°C ~ +60°C for Operation |
Humidity | 5% to 95% (at 35°C) Non-condensing |
Regulatory Compliance
- Safety - IEC 60950 Safety - IEC 60950
- CE
- RoHS
- Complies to ANS/IEC standards
- Complies with Telecom Part 68, FCC Part 15 and CISPR 22 Class A
- EMC EN55022: 1998 + A1 and A2
- EMC EN55024,
- Operation ETS 300 019 Class 3.2
- Storage ETS 300 019 Class 1.2
- Transportation ETS 300 019 Class 2.3
NMS (with Telnet) OAM port Specifications
Network Interface | RJ-45 10/100/1000BaseT (Auto sensing) |
Compatibility | Ethernet Version 2.0 IEEE 802.3 |
Protocols supported | ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP |
Management | SNMP, Serial login, Telnet login |
EMI Compliance |
|
External Alarms
- Dry Contact Relay - 2 Form C
- Rated upto 72V DC, 1 Amp.
Chassis
- 1U High (44mm)
- 19-inch rack-mounting shelf
- Also available in Desktop / Table Top Version.
Mechanical Specification
Height | 44 mm (1U) |
Depth | 260 mm |
Width | 480 mm (19 inch rack mountable) |
Weight | 3 Kgs. |
Power Consumption
Power Consumption | <18 Watts |
Power Supply Options
- Dual Redundant
- 1+1 AC power (100 to 240V AC, 50 / 60 Hz)
- 1+1 DC (-48V) power (40 to 72V DC)
- 1+1 DC (-24V) power (18 to 40V DC)
- AC plus DC (AC + DC), AC or DC
- EMI / EMC compliant.
AC Power Supply Specifications
Input AC Voltage | 110 / 220 Volts AC |
Range of input AC Voltage | 100 V to 240 V AC, 50Hz/60Hz. |
AC Input Connector | IEC Connector |
24V DC Power Supply Specifications
Power Supply | 24V DC |
Range of input | 18V to 40V DC |
Input voltage reversal protection | Provided |
Under voltage protection | < 4.85V |
Over voltage protection | > 5.15V |
Efficiency at full load | > 90% @ 5V/4A (when input voltage-24V) |
Ripple at full load | < 5mVrms |
Spike at full load | < 50mV |
48V DC Power Supply Specifications
Power supply | -48V DC |
Range of input | -40V DC to -72V DC |
Under voltage protection | < 4.85V |
Over voltage protection | > 5.15V |
Efficiency at full load | > 91% @ 5V/2A (when input voltage -48V) |
Ripple at full load | < 5mVrms |
Spike at full load | < 50mV |