DS3/T3 over IP/Ethernet, TDM over IP / TDM over Packet / TDM over Ethernet - Technical Specifications
Orion Telecom Offers Power Utility Solutions Oil & Gas Networks Solutions Railway & Metro Rail Solutions PTP IEEE-1588v2 GPS Primary Reference Clock Packet Optical Transport Multiplexers Teleprotection SCADA, FOTE, OLTE Digital Cross Connects Echo Cancellers IP/Ethernet over TDM 1+1 APS (Fail-Over) Solutions Monitoring Groomer Solutions
Product Overview
Orion Telecom Networks Inc. offers 'VCL-DS3oP', DS3/T3 over IP / Ethernet equipment provides transmission of one, point-to-point, DS3/T3 link over an IP / Ethernet, MEF or MPLS Pseudo-wire networks. The DS3oP is compatible with AES/DES Encryption Data standards.
Valiant's 'VCL-DS3oP', DS3/T3 over IP / Ethernet equipment provides transmission of one, point-to-point, DS3/T3 link over an IP / Ethernet, MEF or MPLS Pseudo-wire networks. The DS3oP is compatible with AES/DES Encryption Data standards.
The 'VCL-DS3oP', DS3/T3 over IP / Ethernet equipment is powered by a powerful PowerPC 400 MHz Processor which provides a highly reliable clock recovery mechanism for low jitter and wander control, even under variable network conditions.
The 'VCL-DS3oP', DS3/T3 over IP / Ethernet equipment provides 2 x GigE electrical ports along with 2 x Gigabit optical ports which allow the users to implement 1+1 Ethernet link redundancy (Rapid Spanning Tree Protocol and Ethernet Port Trunking) and QoS by implementing 802.1Q based VLAN, Differentiated Services (Diffserv / DSCP), Port based Priority and 802.1p packet priority classification protocols for network optimization.
T1oP and DS3oP / T3oP - IP Multiplexer / TDM over IP / Ethernet / Packet - Products Comparison Chart (PDF)
Techical Specifications
DS3oP Specifications
Max number of logical Link | One point-to-point logical link |
Max DS3 payload MTU Size | User configurable from 1 to 1800 Bytes |
Supported Transport Mechanisms | IETF-PWE3 and SAToP |
Supported PSN (Packet Switched Networks) type | UDP, IP, MPLS and MEF |
QoS | 802.1q, 802.1p packet priority |
DS3 Interface
Number of Port | One |
Framing Formats | Framed, Unframed (User selectable) |
Framing | B3ZS and G.832 framing modes (user selectable) |
Line Coding | Meets ANSI T1.404 M13 or C-bit parity |
Line Impedance | 75 Ohms |
Gigabit Ethernet Switch Interface
Number of Ports | 4 Ports - 2 Gigabit optical ports and 2 GigE (electrical) ports. Complies with IEEE802.3, 802.1Q and 802.1P |
Electrical | 10/100/1000 Auto-negotiation / MDI-X (Auto-sensing), Full-Half Duplex, RJ45 Electrical Connector |
Protection | ESD protection |
Maximum Frame Size | 9000 Bytes (Jumbo Frames) |
Switching Capacity | Upto 6 Gbps, Non-blocking |
Gigabit Ethernet Optical Interface Specifications
Optical Interface Type | SFP |
Compliance |
|
Safety | Class 1 Laser Safety/ IEC-60825 Compliant |
Bit Rate | 1.25 Gbps |
Wavelength | 1310 / 1550 nm |
Distance | 550m to 80Kms, as per order |
Optical Connector | LC |
Command Language
- Windows based GUI (Graphical User Interface)
- Command Line Interface (English text commands)
Management and Control Interfaces
- COM Port (RS232 Serial Port)
- USB Port
- 10/100/1000BaseT Ethernet Port (each multiplexer may be assigned an IP address and connected to a LAN / IP network for remote access and management through the 10/100BaseT Ethernet Port for in-band configuration, management and access)
- Telnet
- SNMP, V2 Monitoring
- Additionally, a Windows based GUI (Graphical User Interface) for easy configuration, management and access.
Environment
Temperature | -20°C ~ +60°C for Operation |
Storage | -40°C ~ +70°C for Storage | Humidity | 5% to 95% (at 35°C) Non-condensing |
Regulatory Compliance
- Safety - IEC 60950 Safety - IEC 60950
- CE
- RoHS
- Complies to ANS/IEC standards
- Complies with Telecom Part 68, FCC Part 15 and CISPR 22 Class A
- EMC EN55022: 1998 + A1 and A2
- EMC EN55024,
- Operation ETS 300 019 Class 3.2
- Storage ETS 300 019 Class 1.2
- Transportation ETS 300 019 Class 2.3
NMS (with Telnet) OAM port Specifications
Network Interface | RJ-45 10/100/1000BaseT (Auto sensing) |
Compatibility | Ethernet Version 2.0 IEEE 802.3 |
Protocols supported | ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP |
Management | SNMP, Serial login, Telnet login |
EMI Compliance |
|
External Alarms
- Dry Contact Relay - 2 Form C
- Rated upto 72V DC, 1 Amp.
Chassis
- 1U High (44mm)
- 19-inch rack-mounting shelf
- Also available in Desktop / Table Top Version.
Mechanical Specification
Height | 44 mm (1U) |
Depth | 260 mm |
Width | 480 mm (19 inch rack mountable) |
Weight | 4 Kgs. |
Power Consumption
Power Consumption | <18 Watts |
Power Supply Options
- Dual Redundant (AC + DC)
- 1+1 AC power (100 to 240V AC, 50 / 60 Hz)
- 1+1 DC (-48V) power (40 to 72V DC)
- 1+1 DC (-24V) power (18 to 40V DC)
- AC or DC
AC Power Supply Specifications
Input AC Voltage | 110 / 220 Volts AC |
Range of input AC Voltage | 100 V to 240 V AC, 50Hz/60Hz. |
AC Input Connector | IEC Connector |
24V DC Power Supply Specifications
Power Supply | 24V DC |
Range of input | 18V to 40V DC |
Input voltage reversal protection | Provided |
Under voltage protection | < 4.85V |
Over voltage protection | > 5.15V |
Efficiency at full load | > 90% @ 5V/4A (when input voltage-24V) |
Ripple at full load | < 5mVrms |
Spike at full load | < 50mV |
48V DC Power Supply Specifications
Power supply | -48V DC |
Range of input | -40V DC to -72V DC |
Under voltage protection | < 4.85V |
Over voltage protection | > 5.15V |
Efficiency at full load | > 91% @ 5V/2A (when input voltage -48V) |
Ripple at full load | < 5mVrms |
Spike at full load | < 50mV |