STM-1 Optical to STM-1 Electrical Converter
Orion Telecom Offers Power Utility Solutions Oil & Gas Networks Solutions Railway & Metro Rail Solutions PTP IEEE-1588v2 GPS Primary Reference Clock Packet Optical Transport Multiplexers Teleprotection SCADA, FOTE, OLTE Digital Cross Connects Echo Cancellers IP/Ethernet over TDM 1+1 APS (Fail-Over) Solutions Monitoring Groomer Solutions
STM-1 Optical to STM-1 Electrical Converter
Description
Orion Telecom offers STM-1 Optical to STM-1 Electrical converter provides a simple and cost-effective conversion between STM-1 optical interface and STM-1 electrical interface. STM-1 Optical to STM-1 Electrical converter is an interface conversion equipment supplied with one STM-1 electrical (75 Ohms BNC) interface and one STM-1 optical (MSA compliant SFP) interface.
1+1, STM-1 Optical to STM-1 Electrical converter option is also offered and available.
STM-1 Optical to STM-1 Electrical converter is a compact solution housed in a 1U high (44mm), 19-inch rack-mountable shelf, which can be installed in any DIN-standard 19-inch rack.
This unit offers five power supply options. Options for the power supply to the equipment include:
- Dual DC - 48V Inputs (range -18V DC ~ -72V DC), for power input redundancy.
- Single AC 110V AC to 240V AC, 50 / 60 Hz Inputs.
- Single -48V DC (range -18V DC ~ -72V DC) Input.
Data Sheet (PDF)
Features and Highlights
- 1+0, STM-1 Optical to STM-1 Electrical converter version
- Dual (1+1), STM-1 Optical to STM-1 Electrical converter version
- Standard 75 BNC connector of the STM-1 electrical interface
- Standard MSA compliant SFP optical interface. Allows installation of field removable / field upgradable optical SFPs
- Short haul (1310nm), long haul (1550nm) and multi mode (850nm) optical SFP modules offered.
- Offers multiple distance SFP options on the optical link 15KM, 40KM, 80KM, 120KM, 150KM, 200KM and 260KM.
- Management options:
- Serial RS232 Port (COM Port)
- USB interface (COM Port)
- 10/100 BaseT Ethernet Port allows the equipment to be remotely accessed using Telnet over a TCP-IP Network
- SNMP V2 monitoring
- Network Management System - Windows XP and Windows 7 compatible
- Network Management System (NMS)
- High reliability, complies to ITU-T G.703 and G.957
- Low power consumption
- Supports local and remote loop-back on electrical or optical interfaces for system diagnostics.
- Simple operation and maintenance.
- 75 Ohms compliant with ITU-T G.703 and Telcordia GR-253 155Mbps electrical interfaces (BNC connector).
- ITU-T G.783 compatible loss of signal detect.
- STM-1 Electrical Interface - handles over 12.7dB of cable loss.
- SFP - LC optical interface.
- SFP with DDMI Interface - for read back of transmit and received optical power.
- Class 1 laser safety.
- Compliant with ITU-T G.957 STM-1.
Compliance
G.703 | Provides one standard STM-1 electrical interface complying with G.703 |
G.707 | Network node interface for the synchronous digital hierarchy (SDH) |
G.781 | Structure of Recommendations on equipment for the Synchronous Digital Hierarchy (SDH) |
G.782 | Types and characteristics of Synchronous Digital Hierarchy (SDH) equipment |
G.783 | Characteristics of Synchronous Digital Hierarchy (SDH) equipment functional blocks |
G.813 | Timing characteristics of SDH equipment slave clocks (SEC) |
G.825 | Control of Jitter and Wander within Digital Networks Which are Based on the Synchronous Digital Hierarchy (SDH) |
G.957 | Provides one standard STM-1 optical interface complying with G.957 |
G.958 | Digital line systems based on the Synchronous digital hierarchy for use on optical fiber cables |
Alarms
- LOS (Loss of Signal).
- AIS (All Ones Alarm).
- Optical Power Input High Alarm.
- Optical Power Input Low Alarm.
- SNMP V2 Traps.
Loop-backs
- STM-1 Electrical local loop-back.
- STM-1 Electrical remote loop-back.
- STM-1 Optical local loop-back.
- STM-1 Optical remote loop-back.
Management Options
- Serial RS232 Port (COM Port).
- 10/100BaseT Remote Management over LAN Telnet.
- 10/100BaseT Telnet over TCP-IP Network.
- SNMP V2.
- USB interface.
- Network Management System (NMS).
Security and Protection
- Secured Access via SSH V2.
- Password Protection: Password Protection in compliance with the mandatory clauses of the GR-815-CORE-2 specifications for secured access control.
- Security Audit: All access logs for up to 30 days are maintained for security audit purposes.
- Logging: Maintains a log of all successful and un-successful attempts. Logged information includes the ID and the IP address of the accessing entities. Alerts the administrator if the un-successful logging attempts exceed 5.
Technical Specifications
STM-1 Electrical Interface
Data Rate | 155.52 Mbps |
Standard | ITU-T G.703 Compliant |
Impendence | 75 Ohms resistive |
Peak to peak voltage (signal) | 1 ± 0.1V |
Rise time between 10% and 90% amplitudes of the measured steady state amplitude | < 2 ns |
Maximum Attenuation | 12.7 dB at 78 Mhz |
Jitter | As per ITU-T G.825 |
Line Code | CMI |
Physical Connector | BNC (Female) |
STM-1 Optical Interface
Data Rate | 155.52 Mbps |
Standard | ITU-T G.703 Compliant |
Coding | NRZ |
Connector | LC |
Light source | Laser Diode |
Wave length options | 850nm / 1310nm / 1550nm |
Transmission Type | Dual Fiber (standard) Single Fiber Bi-directional (optional) |
Automatic Laser Shut Down Option | Provided - User selectable option |
Transmit power options - S 1.1 | -11.5 dBm (1310nm) |
Transmit power options - L 1.1 / L 1.2 | -2.5 dBm (1310nm / 1550nm) |
Receive sensitivity options - S 1.1 | -31 dBm (1310nm) |
Receive sensitivity options - L 1.1 / L 1.2 | -34 dBm (1310nm) / -38 dBm (1550nm) |
Receiver overload - S 1.1 | -8 dBm (1310nm) |
Receiver overload - L 1.1 / L 1.2 | -10 dBm (1310nm / 1550nm) |
Section loss - S 1.1 | 0 - 12 dB |
Section loss - L 1.1 / L 1.2 | 10 - 28 dB |
Automatic Laser Shut Down Option | Provided - User selectable option |
Power Supply
Input voltage |
|
Power consumption | < 6 W (1+0 version) < 8 W (1+1 version) |
Environmental
Working temperature | -50C ~ +500C for operation |
Relative humidity | < 90% (Non condensing) |
Altitude | Sea level to 5000 meters |
Mechanical Specifications
Rack Mounting | Standard 19 Inch. DIN Rack |
Height | 42 mm. |
Depth | 125 mm. |
Width | 205 mm. |
Weight | 1.5 kg |