Home  |  Products  |  About Us  |  What's New  |  Contact Us  |  Press   |  E-mail

releted_link.gif (653 bytes)

E1 to DS3 and DS3 to E1 Converter

Orion Telecom Networks Inc. offers E1 to DS3 and DS3 to E1 converter solutions provides upto from 8 E1 to 32 E1 interface to DS3 and DS3 to upto 32 E1s. These converters may be installed in a 19 inch VCL-MegaConnect chassis in any "mix" for converting "n" x E1 interfaces to DS3 interfaces. (Note: The value of "n" is in multiples of 8 E1 ports or DS3 ports). The converter provides a simple and cost effective method to convert a DS3 stream to an E1 stream.

Orion offers a wide range of converters, as below:

The converter provides redundant power supply and mounts in a 19-inch 6U shelf. The converter may be accessed by the user for configuration and monitoring through a Windows based GUI that is shipped with the system. It may be also accessed remotely over a TCP-IP network.

E1 Interface - Technical Specifications
Line Rate E1 (2.048Mbps 50 bps)
Line Code HDB3
Available Time Slots 1 - 31
Framing G.704
Clock Internal, Loop timed
Electrical G.703
Jitter G.823
Impedance 120 Ohms
Connectors RJ-45 Female or Wire Wrap (both options available)
DS3 Interface
 Number of DS3 Interfaces  1
 Bit Rate  44.736 Mbps
 Bit Rate Tolerance  +/- 20ppm
 Line Code  B3ZS
 Framing  * Meets ANSI T1.404
 * M13 or C-bit parity
 Pulse  Shape Meets ANSI T1.102-1993 and
 Bellcore GR-499-CORE
 Signal Level to clear Loss
 of Signal condition
 = 20mV
 Signal Level to clear Loss
 of Signal condition  
 =90mV
Mechanical Specifications
Rack Mounting Standard 19-inch DIN rack
Height 266mm (6U high)
Depth 260mm
Width 477mm
Power Supply (with 1+1 Redundant Power Supply)
Input DC Voltage -48V DC (nominal)
Range of Input -40V to -60V DC
Output Voltage +5V
Input Voltage Reversal Protection Provided in the Card
Over Current Protection Provided in the Card
Short Circuit Protection Provided in the Card (recovers automatically)
Under Voltage < 4.5V
Over Voltage 5.4V to 5.6V
Efficiency at full load >80% Typ.
Ripple at full load <5mVrms
Spike at full load <50mV
Power Consumption 12W - 8 port, E1 to DS3 converter configuration
30W - 64 port, E1 to DS3 converter configuration
Temperature 0C to 55C
Humidity 95% RH (non-condensing)
Cooling Convection Cooling

Others Links

Technical specifications are subject to change without notice.
All brand names and trademarks are the property of their respective owners.

TOP

 

E1 to DS3 and DS3 to E1 Converter Data Sheet (PDF)
Ethernet over E1 Converter
Ethernet over 4 E1 Converter
4 Ethernet over E1 Converter
Ethernet over SDH
STM-1 Optical to STM-1 Electrical Converters
4x E1 Over Ethernet (TDM over IP) Multiplexer
4x T1 Over Ethernet (TDM over IP) Multiplexer
Ethernet to E3 Converter
E1 to T1 Data E1 Converter
E3 to T1 and T1 to E3 Converter
AC to DC converter converts -48V DC to AC mains input - 19 inch rack-mount
AC to DC converter converts -48V DC to AC mains input - Desktop Version
72 Ports T1 DACS Switch
Ethernet over T1 Switch
Ethernet over DS3 Switch
1xE1 over Ethernet Multiplexer (TDM over IP)
2xE1 over Ethernet Multiplexer (TDM over IP)
Ethernet over T1 / J1 Converter

GSM Gateway / GSM Channel Banks

Echo Cancellers and Voice Quality Enhancement

Digital Access Cross Connect Switch (DACS)

Groomers (Hi-Z Non-Instrusive Monitoring)

STM SDH Multiplexer
Multiplexers
Optical Transmission
E1, T1, E3, DS3, Ethernet Converters
APS (1+1) Automatic
Protection Switch
::   Application Diagram  ::
 

Home    |   What's New   |   About Us   |   Contact Us   |   Products   |    Press   |   E-mail